Publicações em Periódicos Internacionais

2018

 

B. J. Mailhe, R.A. Elias, I.P.C. da Silva, N. Sadowski, N.J. Batistela, P. Kuo-Peng, “Influence of Shielding on the Magnetic Field Measurement by Direct H-Coil Method in a Double-Yoked SST”, IEEE Transactions on Magnetics, vol. 54, no. 3, Março de 2018, p. 1-4, USA

2017

 

J.B. Padilha, P.Kuo-Peng, N. Sadowski, J.V. Leite, N.J. Batistela, “Restriction in the determination of the Jiles-Atherton hysteresis model parameters”, Journal of Magnetism and Magnetic Materials, ELSEVIER, vol. 442, p. 8-14, Holanda.

P. Dular, P. Kuo-Peng, M.V. F. da Luz, L. Krahenbuhl, “Model refinements of transformers via a subproblem finite elemento method”, The International Journal for Computation and Mathematics in Electrical and Electronic Engineering – COMPEL, vol. 36, n. 1, p. 309-319, janeiro 2017, Inglaterra.

T. Staudt, L. Gerbaud, F. Wurtz, N.J.Batistela, P. Kuo-Peng, “Modeling and sizing by optimization of a Brushless Doubly-Fed Reluctance Machine”, International Journal of Applied Electromagnetics and Machanics – vol. 53, p. S261-S277, março 2017, Holanda.

 

2016

T. Staudt, F. Wurtz, L. Gerbaud, N.J. Batistela, P. Kuo-Peng, “An optimization-oriented sizing model for brushless doubly fed reluctance machines: Development and experimental validation”- Electric Power Systems Research – ELSEVIER, vol. 132, 2016, p. 125-131, Holanda.

P. Dular, P. Kuo-Peng, M.V. Ferreira da Luz, L. Krahenbuhl, “Progressive Current Source Models in Magnetic Vector Potential Finite-Element Formulations”, IEEE TRANSACTIONS ON MAGNETICS, vol. 52, No. 3, Março de 2016, p. 1-4, USA.

J.B. Padilha, P. Kuo-Peng, N. Sadowski, N. J. Batistela, “Vector Hysteresis Model Associated With FEM in a Self-Excited Induction Generator Modeling”,  IEEE TRANSACTIONS ON MAGNETICS, vol. 52, No. 3, Março de  2016, p. 1-4, USA.

F. A. Fujita, N. Sadowski, P. Kuo-Peng, “Use of Non-Traditional Temperatures on Aluminum Caged Centrifuged Rotors Annealing – Assessment of the Viability and Effectiveness in Reducing Inter-bar Losses”, IEEE Transactions on Industrial Electronics, 19 July 2016, p 1-9, USA.

 

2015

P. Dular, L. Krahenbuhl, M.V.F. da Luz, P. Kuo-Peng, C. Geuzaine, “Progressive inductor modeling via a finite elemento subproblem method”, COMPEL (The international journal for computation and mathematics in electrical and electronic engineering), Vol. 34, No. 3, maio de 2015, p.851-864, Inglaterra.

H.V.H. Ayala, L. dos Santos Coleho, V.C. Mariani, M.V.F. da Luz, J.V.Leite, “Harmony Search Approach Based on Ricker Map for Multi-Objective Transformer Design Optimization”  IEEE TRANSACTIONS ON MAGNETICS, VOL. 51, NO. 3, março de  2015, p. 1-4, USA.

D. Schmitz, N.Sadowski, S.L. Nau, N.J. Batistela, J.P.A. Bastos, “Three-Phase Electromagnetic Device for the Evaluation of the Magnetic Losses in Electric Motors Stators”, IEEE Transactions on Energy Conversion, vol. 30, No. 2, junho de 2015, p. 515-521, USA.

M. Januário, P. Kuo-Peng, N.J. Batistela, “Modelling of the impredance frequency response of transformers at no load and under nominal conditions”, IET Electric Power Applications, vol.9, No. 6, Julho 2015, p. 412-419, USA.

L.A. Feler, M. Rigoni, H.F. Santos, R.A. Elias, N. Sadowski, P. Kuo-Peng, N.J. Batistela, J.P.A. Bastos, “A System for Harvesting Energy from Stray Magnetic Fields”, Sensing and Imaging,vol. 16, número 1, 28 de Setembro de 2015. , p.1-18, USA.

P. Dular, M.V.F. da Luz, P. Kuo-Peng, L. Krahenbuhl, “Correction of homogenized lamination stacks via a subproblem finite elemento method”, The International Journal for Computation and Mathematics in Electrical and Electronic Engineering), vol. 34, No. 5, 2015, p.1553-1563, Inglaterra.

S.Lima, M.V.F. da Luz, J.P.A. Bastos, “Implementation of a Fuzzy Logic Controller in a FEM Code to Model a Magnetic Suspension Mechanism”, IEEE TRANSACTIONS ON MAGNETICS, vol. 51, No. 3,Março de 2015, p. 1-4, USA.

H.F. dos Santos, N.Sadowski, N. J. Batistela, J.P.A.Bastos, “Synchronous Generator Fault Investigation by Experimental and Finite Element Procedures”,   IEEE TRANSACTIONS ON MAGNETICS, NO. 3, setembro de  2015, p. 1-4, USA.

 

2013

L. dos S. Coelho, V.C. Mariani, M.V.F. da Luz, J.V.Leite, “Novel Gamma Differential Evolution Approach for Multiobjective Transformer Design Optimization”, IEEE Transactions on Magnetics, vol. 49, No. 5, maio de 2013, p. 2121-2124, USA.

L. dos S. Coelho, F. A. Guerra, N.J. Batistela, J.V. Leite, “Multiobjective Cuckoo Search Algorithm Based on Duffing’s Oscillator Applied to Jiles-Atherton Vector Hysteresis Parameters Estimation”, IEEE Transactions on Magnetics, vol. 49, No. 5, maio de 2013, p. 1745-1748, USA.

C. L. Ribas, E.M. Lourenço, J.V. Leite, N.J. Batistela, ”Modeling Ferroresonance Phenomena With a Flux-Current Jiles-Atherton Hysteresis Approach”, IEEE Transactions on Magnetics, vol. 49, No. 5, maio de 2013, p. 1797-1800, USA.

M. Le Ny, O. Chadebec, G. Cauffet, Jean-Marc Dedulle, Y. Bultel, S. Rosini, Y. Fourneron, P. Kuo-Peng, “Current Distribution Indentification in Fuel Cell Stacks From External Magnetic Field Measurements”, IEEE Transactions on Magnetics, vol. 49, No. 5, maio de 2013, p. 1925-1928, USA.

S. Grubisic, W.P. Carpes, Jr., J.P.A. Bastos, G. Santos, “Association of a PSO Optimizer With a Quasi-3D Ray-Tracing Propagation Model for Mono Multi-Criterion Antenna Positioning in Indoor Environments”, IEEE Transactions on Magnetics, vol. 49, No. 5, maio de 2013, p. 1645-1648, USA.

T. Le-Duc, G. Meunier, O. Chadebec, Jean-Michel Guichon, J.P.A. Bastos, “General Integral Formulation for the 3D Thin Shell Modeling” , IEEE Transactions on Magnetics, vol. 49, No. 5, maio de 2013, p. 1989-1992, USA.

 

2012

Pompermaier, F.J.H. Kalluf, A. Zambonetti, M.V. Ferreira da Luz, I. Boldea, “Small Linear PM Oscillatory Motor: Magnetic Circuit Modeling Corrected by Axisymmetric 2-D FEM and Experimental Characterization”, IEEE Transactions on Industrial Electronics, v. 59, No. 3, março de 2012, p. 1389-1396, USA.

Dular, L. Krahenbuhl, R. V. Sabariego, M.V.F. da Luz, P. Kuo-Peng, C. Geuzaine, “A Finite Element Subproblem Method for Position Change Conductor Systems”, IEEE Transactions on Magnetics, vol. 48, No. 2, fevereiro de 2012, p. 403-406, USA.

L. dos Santos Coelho, F. A. Guerra, J.V.Leite, “Multiobjective Exponential Particle Swarm Optimization Approach Applied to Hysteresis Parameters Estimation”, IEEE Transactions on Magnetics, vol. 48, No. 2, fevereiro de 2012, p. 283-286, USA.

J.V.Leite, M.V.F. da Luz, N. Sadowski, P.A. da Silva Jr., “Modelling Dynamic Losses Under Rotational Magnetic Flux”, IEEE Transactions on Magnetics, vol. 48, No. 2, fevereiro de 2012, p. 895-898, USA.

J.P. Schelegel, N. Sadowski, N.J. Batistela, B.A.T. Iamamura, J.P.A. Bastos, A.A. Espindola, “Core Tester Iron Losses Segregation by Finite Element Modeling”, IEEE Transactions on Magnetics, vol. 48, No. 2, fevereiro de 2012, p. 715-718, USA.

Ruviaro, F. Runcos, N. Sadowski, I.M. Borges, “Analysis and Test Results of a Brushless Doubly Fed Induction Machine With Rotary Transformes”. IEEE Transactions on Magnetics, vol. 59, No. 6, junho de 2012, p. 2670-2677, USA.

J.L.Muller, R. Romary, A. Benabou, T. Henneron, F. Piriou, J.P.A. Bastos, J.Y. Roger, “Interlaminar short circuit detection: modeling and measurement”, COMPEL (The international journal for computation and mathematics in electrical and electronic engineering), Vol. 31, No. 5, 2012, p.1448-1457, Inglaterra.

 

2010

M.V.F. da Luz, P. Dular, R.V. Sabariego, P. Kuo-Peng, N.J. Batistela, “Electrokinetic Model Refinement Via a Perturbation Finite-Element Method-From 2-D to 3D”, IEEE Transactions on Magnetics, V. 46, No. 8, agosto de 2010, p. 2839-2842, USA.

J.P.A. Bastos, N.Sadowski, “A New method to Solve 3-D Magnetodynamic Problems Without Assembling na Ax = System”, IEEE Transactions on Magnetics, V. 46, No. 8, agosto de 2010, p. 3365-3368, USA.

J.P.A. Bastos, N. Sadowski, “A New Formulation Using Differential Permeability Based on the Source-Field Method”, IEEE Transactions on Magnetics, V. 46, No. 8, agosto de 2010, p. 3369-3372, USA.

Dular, R.V. Sabariego, C. Geuzaine, M.V.Ferreira da Luz, P. Kuo-Peng, L. Krahenbuhl, “Finite Element Magnetic Models via a Coupling of Subproblems of Lower Dimensions”, IEEE Transactions on Magnetics, V. 46, No. 8, agosto de 2010, p. 2827-2830, USA.

Gyselinck, P. Dular, N. Sadowski, P. Kuo-Peng, R. V. Sabariego, “Homogenization of Form-Wound Windings in Frequency and Time Domain Finite-Element Modeling of Electrical Machines”, IEEE Transactions on Magnetics, V. 46, No. 8, agosto de 2010, p. 2852-2855, USA.

B.A.T. Iamamura, Y.Le menach, A. Tounzi, N. Sadowski, E. Guillot, “Study of Static and Dynamic Eccentricities of a Synchronous Generator Using 3-D FEM”, IEEE Transactions on Magnetics, V. 46, No. 8, agosto de 2010, p. 3516-3519, USA.

J.V. Leite, A. Benabou, N. Sadowski, “Transformer Inrush Currents Taking Into Account Vector Hysteresis”, IEEE Transactions on Magnetics, V. 46, No. 8, agosto de 2010, p. 3237-3240, USA.

M.V.Ferreira da Luz, J.V. leite, A. Benabou, N. Sadowski, “Three-Phase Transformer Modeling Using a Vector Hysteresis Model and Including the Eddy Current and the Anomalous Losses”, IEEE Transactions on Magnetics, V. 46, No. 8, agosto de 2010, p. 3201-3204, USA.

Pompermaier, A. Zambonetti, F. J. H. Kalluf, M. V. F. da Luz, N.Sadowski, “Performance analysis of a tubular linear motor applied in compressors”, PEMD 2010 – The 5^th IET International Conference on Power Electronics, Machines and Drives, 19 a 21 de Abril de 2010, Brighto/Inglaterra, p. 1-4. Disponível na IEEE Xplore Digital Library, D.O.I. 10.1049/cp2010/0194.

J. H. Kalluf, C. Pompermeier, M. V. F. da Luz, N.Sadowski, “Modelling of a line-start permanent magnet motor using Finite Element method”, PEMD 2010 – 5^th IET International Conference on Power Electronics, Machines and Drives, 19 a 21 de Abril de 2010, Brighton/Inglaterra, p. 1-4. Disponível na IEEE Xplore Digital Library, D.O.I. 10.1049/cp2010/0204.

C. Coelho, M.C.M, Laranjeira, R. Laus, V.T. Favere, C. S. Teixeira,  M. Rigoni, N.J. Batistela, “Preparation, characterization and determination of magnetic properties of ferrofluids using chitosan-coated magnetic nanoparticles and tween 80 as surfactant for hyperthermia application”, An Journal Indian Macromolecules, v. 6 setembro de 2010, p. 1-10, India.

 

2009

H.Raziq, H. Henao, R. Carlson, “ An induction machine model including interbar currents for studying performances during transients and steady state”, Electric Power Systems Research , No. 79, 2009, p. 181-189, USA.

S.Grubisic, W.P. Carpes Jr., J.P.A. Bastos, “ Optimization Model for Antenna Positioning in Indoor Environments Using 2-D Ray-Tracing Technique Associated to a Real-Coded Genetic Algotithm” , IEEE Transactions on Magnetics, vol. 45, No. 3, Março de 2009, p. 1626-1629, USA.

J.V. Leite, A. Benabou, N. Sadowski, M. V. Ferreira da Luz, “ Finite Element Three-Phase Transformer Modeling Taking Into Account a Vector Hysteresis Model” , J.V. Leite, A. Benabou, N. Sadowski, M.V.Ferreira da Luz, IEEE Transactions on Magnetics, vol. 45, No. 3, Março de 2009, p. 1716-1719, USA.

C.Simão, N. Sadowski, N.J. Batistela, J.P.A. Bastos, “ Evaluation of Hysteresis Losses in Iron Sheets Under DC-biased Inductions” , IEEE Transactions on Magnetics, vol.45, No. 3, Março de 2009, p. 1158-1161, USA.

P. Dular, R.V. Sabariego, M.V. Ferreira da Luz, P. Kuo-Peng, L. Krähenbühl, “ Perturbation Finite Element Method for Magnetic Model Refinement of Air Gaps and Leakage Fluxes”, IEEE Transactions on Magnetics, vol. 45, No. 3, março de 2009, p. 1400-1403, USA.

C. A. da Silva, J.R. Cardoso, R. Carlson, “ Analysis of a Three-Phase LSPMM by Numerical Method” , IEEE Transactions on Magnetics, vol. 45, No. 3, Março de 2009, p. 1792-1795, USA.

J.P.A. Bastos, “ Is it possible to solve a FEM static case without assembling and storing an Ax = b matrix system?” , International Compumag Society Newsletter – ICS, vol. 16, No. 1, Março de 2009, p. 4-10, Grã-Bretanha/UK.

L.E.S. Spalding, W.P.Carpes Jr., N.J. Batistela, “A Method to Detect the Microshock Risk During a Surgical Procedure”, IEEE Transactions on Instrumentation and Measurement, vol. 58, No. 7, Julho de 2009, p. 2335-2342, USA.

J.V. Leite, A. Benabou, N. Sadowski, “ Accurate minor loops calculation with a modified Jiles-Atherton hysteresis model”, COMPEL – The International Journal for  Computation and Mathematics in Electrical and Electronic Engineering, vol. 28, No. 3, 2009, p. 741-749, Inglaterra.

R. Carlson, N. Sadowski, L.O. Grander, F. Rüncos, C. Ogawa, F.J. Doubrawa Fo., “Modeling the starting performance of high power solid rotor salient pole synchronous motors”, vol.79, No. 12, Dezembro de 2009, p. 1717-1721, Holanda.

 

2008

 G. Vanti, S. L. Bertoli, S. H. L. Cabral, A. G. Gerent, P. Kuo-Peng, “ Semianalytic Solution for a Simple Modelo f Inrush Currents in Transformers” , Transactions on Magnetics – IEEE, vol. 44, No. 6, junho 2008, p. 1270 – 1273, USA.

J.V. Leite, P.A. da Silva Júnior, N. Sadowski, N. J. Batistela, P. Kuo-Peng, J.P.A. Bastos, “ Vector Hysteresis Under nonsinusoidal Induction Waveformas: Modeling and Experimentation”, Transactions on Magnetics – IEEE, vol. 44, No. 6, junho 2008, p. 906– 909, USA.

J.V. Leite, A. Benabou, N. Sadowski, S. Clénet, J.P.A. Bastos, F. Piriou, “ Implementation of na Anisotropic Vector Hysteresis Model in a 3-D Finite-Element Code” , Transactions on Magnetics – IEEE, vol. 44, No. 6, junho 2008, p. 918-921, USA.

Rigoni, J.S.D. Garcia, A. P. Garcia, P.A. da Silva Júnior, N.J. Batistela, P. Kuo-Peng, “ Rogowski coil current meters in nonconventional applications” , IEEE POTENTIALS, vol. 27, No. 4, julho-agosto 2008, p. 40-45, USA.

C.Simão, M.F. de Campos, N. Sadowski, N.J. Batistela, F.J.G. Landgraf, “The influence of different voltage waveforms and grain sizes in electrical steels losses” , Journal of Magnetism and Magnetic Materials, vol. 320, No. 14, Julho de 2008, p. 381-384, USA.

Benabou, J.V. Leite, S. Clénet, C. Simão, N. Sadowski, “ Minor loops modelling with a modificied Jiles-Atherton model and comparison with Preisach model”, Journal of Magnetism and Magnetic Materials, vol. 320, No. 20, Outubro de 2008, p. 1034-1038, USA.

V. Leite, A. Benabou, N.Sadowski, Y. Le Menach, S. Clénet, P. A. Da Silva Jr., Implementation of a vector hysteresis model in 2D Finite Element analysis: study of a RSST with anisotropic sample, Internacional Journal of Applied Electromagnetics and Mechanics, Vol. 28, No. 1-2, 2008, pp. 41-47,Holanda.

Dular, R.V. Sabariego, M.V.Ferreira da Luz, P. Kuo-Peng, L. Krähenbühl, “Perturbation finite-element method for magnetic circuits”, Iet Science Measurement and Technolog, setembro de 2008, vol. 2, No. 6, p. 440-446, Inglaterra.

 

2007

J.S.D. Garcia, M.V.F da Luz, J.P.A . Bastos, N. Sadowski, ” Transverse Flux Machines: What for?” IEEE Multidisciplinary Engineering Education Magazine, vol. 2, No. 1, Março 2007, p. 4 a 6 (CD Rom), USA.

V. Leite, N. Sadowski, P.A . da Silva Júnior, N. J. Batistela, P. Kuo-Peng, J.P.A. Bastos, ” Modeling Magnetic Vector Hysteresis With Play Hysterons” , IEEE Trans. On Mag., vol.43, No. 4, abril de 2007, p. 1401 a 1404, USA.

K. Donadel, M.D.V. Felisberto, V.T. Fávere, M. Rigoni, N. J. Batistela, M.C.M. Laranjeira, “Synthesis and characterization of the iron oxide magnetic particles coated with chitosan biopolymer” , Materials Science & Engineering. C, Biomimetic Materials, Sensors and Systems, vol. 27, junho de 2007, p. 1 a 6 (avaliable on line), Holanda.

J.V. Leite, A. Benabou, P.A. da Silva Jr., N. Sadowski, T. Henneron, S. Clénet, P. Kuo-Peng, F. Piriou, N.J. Batistela, “Analysis of a rotational single sheet tester usisng 3D finite element model taking into account hysteresis effect” , COMPEL – The International Journal for  Computation and Mathematics in Electrical and Electronic Engineering, vol. 26, No. 4, julho 2007, p. 1037-1048, Inglaterra.

J. Antunes, J.P.A . Bastos, N. Sadowski, “Comparison Between torque calculation methods in a non-conforming movement interface” , COMPEL – The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol. 27, No. 1, p. 27-36, Inglaterra.

 

2006

 Grubisic, W. P. Carpes Jr., C. B. Lima, P. Kuo-Peng, “Ray-Tracing Propagation Model Using Image Theory With a New Accurate Approximation for Transmited Rays Through Walls”, IEEE Trans. On Mag., vol. 42, No. 4, abril de 2006, p. 835-838, USA.

Dular, P. Kuo-Peng, “Dual Finite Element Formulations for the Three-Dimensional Modeling of Both Inductive and Capacitive Effects in Massive Inductors”, IEEE Trans. On Mag., vol. 42, No. 4, abril de 2006, p. 743-746, USA.

J. Antunes, J.P.A . Bastos, N. Sadowski, A . Razek, L. Santandrea, F. Bouillault, F. Rapetti, “Torque Calculation With Conforming and Nonconforming Movement Interface”, IEEE Trans. On Mag., vol. 42, No. 4, abril de 2006, p. 983-986, USA.

J. Antunes, J.P.A . Bastos, N. Sadowski, A . Razek, L. Santandrea, F. Bouillault, F. Rapetti, “Comparison Between Nonconforming Movement Methods”, IEEE Trans. On Mag., vol. 42, No. 4, abril de 2006, p. 599-602, USA.

L. Ávila, A. C. Lisboa, L. Krähenbühl, W.P.Carpes Junior, J. A. Vasconcelos, R. R. Saldanha, R.H.C. Takahashi, “Sensitivity Analysis Applied to Decision Making in Multiobjective Evolutionary Optimization”,  IEEE Trans. On Mag., vol. 42, No. 4, abril de 2006,  p. 1103-1106, USA.

Dular, R. V. Sabariego, P. Kuo-Peng, “Three-dimensional finite element modeling of inductive and capacitive effects in micro-coils”, The international journal for computation and mathematics in electrical and electronic engineering – COMPEL, vol. 25, No. 3, agosto de 2006, p. 642-651, Inglaterra.

 J.S. D. Garcia, S. L. Ávila, W.P.Carpes Jr., “ Introduction to Optimization Methods: a Brief Survey of Methods” , IEEE Multidisciplinary Engineering EEducation Magazine, vol. 1, No. 2, junho de 2006, p. 1 -5, USA.

 

2005

J.V. Leite, N. Sadowski, P. Kuo-Peng, J.P.A . Bastos, “A New Anisotropic Vector Hysteresis Model Based on Stop Hysterons” , IEEE Trans. On  Mag., vol. 41, No. 5, maio de 2005, CD Rom, p. 1500-1503, USA.

O.J.Antunes, J.P.A . Bastos, N. Sadowski, A. Razek, L. Santandrea, F. Bouillault, F. Rapetti, “Using Hierarchic Interpolation With Mortar Element method for Electrical Machines Analysis”, IEEE Trans. On  Mag., vol. 41, No. 5, , maio de 2005, CD Rom, p. 1472-1479, USA.

 

2004

Ruch, J.P.A . Bastos, “Numerical simulation of a magnetic flux leakage benchmark problem” , Revista Insight, vol. 46, No. 12, p. 736-741, 2004, Dezembro de 2004, Inglaterra.

A . M. Oliveira, P. Kuo-Peng, N. Sadowski, F. Rüncos, R. Carlson, P. Dular, “Finite-Element Analysis of a Doublé-Winding Induction Motor With a Special Rotor Bars Topology”, IEEE Trans. On Magn. Vol. 40, No. 2, Março de 2004, p. 770-773, USA.

V. Leite, S. L. Ávila, N. J. Batistela, W. P. Carpes Jr., N. Sadowski, P. Kuo-Peng, J.P.A . Bastos, “Real Coded Genetic Algorithm for Jiles-Atherton Model Parameters Identification”, IEEE Trans. On Mag. Vol. 40, No. 2, Março 2004, p. 888-891, USA

J. Antunes, J. P. A . Bastos, N. Sadowski, “Using high order finite elements in problems with movement”, IEEE Trans. On Magn. Vol. 40, No. 2, Março de 2004, p. 529-532, USA

Gyselinck, P. Dular, N. Sadowski, J.V. Leite, J.P.A . Bastos, “Incorporation of a Jiles-Atherton vector hysteresis model in 2D FE magnetic field computations”, COMPEL, vol. 23, No. 3, 2004, p.685-693, Inglaterra.

V. Leite, N. Sadowski, P. Kuo-Peng, N.J. Batistela, J.P.A . Bastos, A . A . de Espíndola, “Inverse Jiles-Atherton Vector Hysteresis Model”, IEEE Trans. On Magn., vol. 40, No. 4, Julho de 2004, p. 1769-1775, USA. (Regular Paper).

L. Avila, W.P. Carpes Jr., A . Vasconcelos, “Optimization of an Offset Reflector Antena Using Genetic Algorithms”, IEEE Trans. On Mag. Vol. 40, No. 2, Março de 2004, p. 1256-1259, USA

A . M. de Oliveira, R. Antunes, P. Kuo-Peng, N. Sadowski, P. Dular, “Electrical machine analysis considering field – circuit – movement and skewing effects”, COMPEL, vol. 23,  No. 4, 2004, p. 1080-1091, Inglaterra.

 

2003

J.V. Leite, N. Sadowski, P. Kuo-Peng, N.J. Batistela, J. P. A . Bastos, “The Inverse Jiles-Atherton Model Parameters Identification”, IEEE Trans. on Magn., vol. 39, No. 3, p. 1397-1400, Maio de 2003, USA.

J Gyselinck, P. Dular, L. Vandevelde, J. Melkebeek, A . M. Oliveira, P. Kuo-Peng, “Two-dimensional harmonic balance finite element modelling of electrical machines taking motion into account”, COMPEL, vol. 22, No. 4, p. 1021-1036, 2003, Inglaterra.

Dular,P; Gyselinck,J; Geuzaine, C; Sadowski, N; Bastos, J.P.A. “A 3D magnetic vector potential formulation taking eddy currents in lamination stacks into account”, IEEE Trans. on Magn., Vol. 39, No. 3, Maio de 2003, p. 1424-1427, USA.

 

2002

Déas, P. Kuo-Peng, N.Sadowski, A.M. de Oliveira, J.L. Roel, J.P.A.Bastos, “2D FEM modeling of the tubular linear induction motor taking account the movement”, IEEE Trans. on Magn., vol. 38, No. 2, p. 1165-1168, Março de 2002, USA.

A.M. de Oliveira, P. Kuo-Peng, N.Sadowski, F.B. Pereira, J.P.A.Bastos, “A non a priori approach to analyze electrical machines modeled by FEM connected to static converters”,  IEEE Trans. on Magn., , vol. 38, No. 2, p. 933-936, Março de 2002, USA.

M.V. Ferreira da Luz, P. Dular, N.Sadowski, C. Geuzaine, J.P.A.Bastos, “Analysis of a permanent magnet generator with dual formulations using periodicity conditions and moving band”,  IEEE Trans. on Magn., vol. 38, No. 2, p 961-964, Março de 2002, USA.

R.Carlson, C. da Silva, N.Sadowski, Y. Lefèvre, M.Lajoie-Mazenc, “The effect of the stator slots opening on the inter-bar currents of skewed cage induction motor”, IEEE Trans. on Magn., vol. 38, No. 2, p. 1285-1288, Março de 2002, USA.

P.I. Koltermann, J.P.A.Bastos, N.Sadowski, N.J. Batistela, A. Kost, “Non-linear magnetic field model by FEM taking into account hysteresis characteristics with M-B variables”,  IEEE Trans. on Magn., vol. 38, No. 2, p. 897-900, Março de 2002, USA.

N.Sadowski, N.J. Batistela, J.P.A.Bastos, M.Lajoie-Mazenc, “An inverse Jiles-Atherton model to take into account hysteresis in time stepping finite element calculations”, IEEE Trans. on Magn., vol. 38, No. 2, p. 797-800, Março de 2002 USA.

Dular, P. Kuo-Peng, “An efficient time discretization procedure for finite element-electronic circuit equation coupling”, COMPEL (The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol. 21, No. 2, p. 274-285, 2002, Inglaterra.

A . Domínguez, A . Raizer, W.P. Carpes Jr., “Electromagnetic Fields Radiated by a Cellular Phone in Close Proximity to Metallic Walls”, IEEE Trans. On Magn., vol. 38, No. 2, p. 793-796, Março de 2002, USA.

Kost, J.P.A. Bastos, K. Miethner, L. Jänicke, “Improvement of Nonlinear Impedance Boundary Conditions”, IEEE Trans. On Magn., vol. 38, No. 2, p. 573-576, Março de 2002, USA.

W.P. Carpes Jr., L. Pichon, A. Razek, “Analysis of the Coupling of an Incident Wave With a Wire Inside a Cavity Using an FEM in Frequency and Time Domains”, IEEE Trans. on Electromagnetic Compatibility, vol. 44, No. 3, p. 470-475, Agosto de 2002, USA.

 

2001

A. Righi, N.Sadowski, R.Carlson, J.P.A.Bastos, N.J. Batistela, “A new approach for iron losses calculation in voltage fed time stepping finite elements”, IEEE Transactions on Magnetics, vol 37, No. 5, p. 3353-3356, Setembro 2001, USA.

A . M. Oliveira, P. Kuo-Peng, M. V. Ferreira da Luz, N.Sadowski, J.P.A.Bastos, “Generalization of coupled circuit-field calculation for polyphase structures”, IEEE Transactions on Magnetics, vol 37, No. 5, p. 3444-3447, Setembro 2001, USA.

Kuo-Peng, J. Roel O., N.Sadowski, N.J. Batistela, J.P.A.Bastos, “Coupling static converter with control loop and non-linear electromagnetic devices”, IEEE Transactions on Magnetics, vol 37, No. 5, p. 3514-17, Setembro 2001, USA.

Dular, C. Geuzaine, M.V.F. da Luz, N. Sadowski, J.P.A . Bastos, “Connection boundary conditions with different types of finite elements applied to periodicity conditions and to the moving band”, COMPEL – The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol 20, No. 1, p. 109-119, maio 2001, Inglaterra.

 

2000

 Dular, P. Kuo-Peng, C. Geuzaine, N. Sadowski, J.P.A . Bastos, “Dual magnetodynamic formulations and their source fields associated with stranded inductors”, IEEE Transaction on Magnetics, vol.36, No. 4, p. 1293-1299, julho de 2000, USA.

Kuo-Peng, N. Sadowski, N.J. Batistela, J.P.A . Bastos, “Coupled field and circuit analysis considering the electromagnetic device motion”, IEEE Transaction on Magnetics, p. 1458-1461, julho de 2000, USA.

Sadowski, M. Lajoie-Mazenc, J.P.A . Bastos, M.V.F. da Luz, P. Kuo-Peng, “Evaluation and analysis of iros losses in electrical machines usisng the Rain-flow method”, IEEE Transaction on Magnetics, vol.36, No. 4, p. 1923-1926, julho de 2000, USA.

P.I. Koltermann, L.A. Righi, J.P.A.Bastos, R.Carlson, N.Sadowski, N.J. Batistela, “A modified Jiles method for hysteresis computation including minor loops”, Revista Physica B, vol. 275, p. 233-237, 2000, Elsevier North-Holland, Holanda.

Dular, N. Sadowski, J.P.A . Bastos, “Dual complete procedures to take stranded inductors into account in magnetic vector potential formulations”, IEEE Transactions on Magnetics, vol.36, No. 4, p. 1600-1604, julho de 2000, USA.

L.A . Righi, P.I. Koltermann, N. Sadowski, J.P.A . Bastos, R. Carlson, A . Kost, L. Jänicke, D. Lederer, “Non-linear magnetic field analysis by FEM using Langevin function”, IEEE Transactions on Magnetics, vol.36, No. 4, p. 1263-1266, julho de 2000, USA.

C.G.C. Neves, R. Carlson, N. Sadowski, J.P.A . Bastos, N.S. Soeiro, S.n.y. Gerges, “Calculation of electromagnetic-mechanic-acoustic behavior of a switched reluctance motor”, IEEE Transactions on Magnetics, vol.36, No. 4, p. 1364-1367, julho de 2000, USA.

Faccioni Filho, A. Raizer, P. Kuo-Peng, “Wave Propagation Analysis Using a New Three-Dimensional TLM Cell” IEEE, Trans. On Magnetics, vol.36, No. 04, p. 925-930, July 2000, USA.

S. Ferreira, W. Carpes Jr., A. Raizer, L. Pichon, A . Razek, “TLM and FEM Methods Applied in the Analysis of EM Coupling”, IEEE, Trans. On Magnetics, vol.36, No. 04, p. 982-985, July 2000, USA.

P. Carpes Jr., L. Pichon, A . Raizek, “A 3D FEM model for EMC analysis: Coupling of na EM wave with a wire inside a cavity”, COMPEL – International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol. 2, No. 2, p. 253-259, Julho, 2000, Inglaterra.

Benhassine, W.P. Carpes Jr., L. Pichon, “Comparison of mass lumping techniques for solving the 3D Maxwell’s equations in the time domain”, IEEE Transactions on Magnetics, vol. 36, No. 4, p. 1548-1552, Julho de 2000, USA.

P. Carpes Jr., L. Pichon, A . Razek, “Efficient analysis of resonant cavities by a finite element method the time domain”, IEE Proceedings – Microwaves, Antennas and Propagation, vol. 147, No. 1, p. 53-57, Fevereiro de 2000, Inglaterra.

Jänicke, A . Kost, J.P.A . Bastos, Local Error Distribution in Adaptively Generated Meshes, IEEE Trans. On Magn., vol. 36, No. 4, p. 1627-1630, julho de 2000 (USA).

P. Carpes Jr., L. Pichon, A. Razek, “A 3d finite element method for the modelling of bounded and unbounded electromagnetic problems in the time domain”, International Journal of numerical modelling : electronic networks, devices and fields, vol. 13, n° 6, p. 527-240, november-december 2000, USA.

 

1999

 C.G.C. Neves, R.Carlson, N.Sadowski, J.P.A.Bastos, N.S. Soeiro, S.N.Y. Gerges,    “Experimental and numerical analysis of induction motors vibrations”,  IEEE Trans. on Magnetics, vol. 35, N. 3, pp. 1314 – 1317, Mai de 1999, USA.

J.A.A. Santos, J.P.A.Bastos, N.Sadowski, “Using Laplace’s equation for defining magnetizing current densities for 3D analysis with edge elements”, IEEE Trans. on Magn., vol. 35, N. 3, p. 1179-1182,  Maio de 1999, USA.

J.A.A Santos, J.P.A . Bastos, Nelson Sadowski, “A Voltage Fed 3d Edge Element Method For Magnetostatics” IEEE Transactions on Magnetics, 1999, USA.

W.P. Carpes Júnior, “Couplage d’une onde avec un fil conducteur dans une cavité: Modélisation paréléments finis”. Revue Internationale de Génie Electrique, v.2, n. 1, p. 107-111, 1999, France.

 

1998

 Telló, G. A . D. Dias, A . Raizer, “The BECM Concepts Applied to Heal Cancer”. IEEE-Transactions on Magnetics, vol.34, No. 5 – p. 2811-2814, 1998, USA.

G. Vanti, A. Raizer, Y. Maréchal, “h-p Adaptivity with Hierarchic Elements”, IEEE – Transactions on Magnetics, vol. 34, No. 5,  p. 3272-3275, 1998, USA.

 Kuo-Peng, N. Sadowski, J.P.A. Bastos, R. Carlson, “Analysis of a combined converter-electromagnetic device by taking into account its control loop”, IEEE Transactions on Energy Conversion, number: PE-I343-EC-0-2,1998, (accepted for publication), USA.

C.G.C. Neves, R. Carlson, N. Sadowski, J.P.A. Bastos, N.S. Soeiro, S.N.Y. Gerges, “Vibrational behavior of switched reluctance motors by simulation and experimental procedures”, IEEE Transactions on Magnetics, vol 34 (5), p. 3158-3161, September 1998, USA.

A . C. Pinho, N. Sadowski, P. Kuo-Peng, J.P. A. Bastos, N.J. Batistela, “A general method for coupling electronic circuits with 3D electromagnetic fields”, IEEE Transactions on Magnetics, vol 34 (5), p. 3166-3169, September 1998, USA.

Sadowski, J.P. A. Bastos, A B. Albuquerque, A C. Pinho, P. Kuo-Peng, “A voltage fed AC contactor using 3D edge elements”, IEEE Transactions on Magnetics, vol 34 (5), p. 3170-3173, September 1998, USA.

 

1997

F-X. Zgainski, Y.Marechal, J-L. Coulomb, M.G.Vanti, A.Raizer, “An a priori Indicator of finite Element Quality based on the Condition Number of the siffness Matrix”, IEEE Transactions on Magnetics, vol. 33, No.2, p. 1748-1751,1997, USA.

M. Matias, A. Raizer, “Calculation of Electric Field Created by Transmission Lines , by 3D-FE Method Using Complex Electric Scalar Potential”, Applied Computational Electromagnetics Society Journal, vol.12, No.1, p.56-60, 1997, USA.

G. Vanti, A.Raizer, Y. Marechal, “Optimal Meshes and h-p Adaptivity”, IEEE Transactions on Magnetics, vol. 33, No.2, p. 1752-1755,1997, USA.

Kuo-Peng, N. Sadowski, J.P.A. Bastos, R. Carlson, N.J. Batistela, “A general method for coupling static converters with electromagnetic structures”, IEEE Transactions on Magnetics, vol 33 (2), p. 2004-2009, Mar., 1997, (invited paper), USA.

J.P.A. Bastos, M.F.R.R. Cabreira,  N. Sadowski, S.R. Arruda, S.L. Nau, “A thermal  analysis of induction motors using a weak coupled modeling”, IEEE Transactions on Magnetics, vol 33 (2), p. 1714-1717, Mar., 1997, USA.

Sadowski, R. Carlson, J.P.A. Bastos, M. Lajoie-Mazenc, “Finite element modeling of electrical machines by simultaneous resolution of fields and electric circuits equations”, Applied Computational Electromagnetics Society (ACES) Journal, vol 12 (1), p. 111-116, January 1997, USA.

M.L. Y Gonzales, R.C. Mesquita, J.P.A. Bastos, “Comparison of convergence rates of edge and nodal elements for 3D magnetostatic problems”, Applied Computational Electromagnetics Society (ACES) Journal, vol 12 (1), p. 80-83, January 1997, USA.

Kuo-Peng, N. Sadowski, J.P.A. Bastos, R. Carlson, N.J. Batistela, M. Lajoie-Mazenc, “A general method for coupling static converters with electromagnetic structures”, IEEE Transactions on Magnetics, vol. 33 (2), p. 2004-2009, Mar., 1997, USA.

Basak, A . F. Flores Filho, J.P.A . Bastos, “Computation of magnetic flux density in a PM DC Linear Motor by 3D Edge Elements method”, Nonlinear Electromagnetics Systems, vol. 10, p. 63-66, 1997,UK.

 

1996

 Sadowski, R. Carlson, A.M. Beckert, J.P.A. Bastos, “Dynamic modeling of a newly designed linear actuator using 3D edge element analysis”, IEEE Transactions on Magnetics, vol 32 (3), p. 1633-1636, May 1996, USA.

 A . Basak, A. F. Flores Filho, J. P.A. Bastos, “Computation of magnetic flux density in a PM DC Linear Motor by 3D Edge Elements method”, Nonlinear Electromagntic Systems – Studies in Applied and Electromagnetics and Mechanics 10, p. 63-66, IOS Press, 1996, UK.

Sadowski, Y. Lefèvre, C.G.C. Neves, R. Carlson, “Finite elements coupled to electrical circuit equations in the simulation of switched reluctance drives: attention to mechanical behaviour”, IEEE Trans. on Magn., vol. 32, N. 3, p. 1086-1089, Maio de 1996, USA.

 

1995

 J.P.A. Bastos, N. Ida, R.C. Mesquita, “A variable local relaxation technique in non-linear problems”, IEEE Transactions on Magnetics, vol 31 (3), p. 1733-1736, May 1995, USA.

 Sadowski, R. Carlson, S.R. Arruda, C.A. da Silva, M. Lajoie-Mazenc, ”Simulation of single-phase Induction motor by a general method coupling field and circuit equations”, IEEE Trans. on Magnetics, vol 31, nº 3, p. 1908-1911, May 1995, USA.

 

1994

 Raizer, “A 3D autoadaptative mesh generator for magnetostatic and magnetodynamic problems”, IEEE Transactions on Magnetics, vol. 30, No.5, p. 3531-3534,1994, USA.

 J.P.A. Bastos, N. Ida , R.C. Mesquita, “Virtual Elements:  a smoothing technique to provide continuity in FEM discretized Results” , IEEE Transaction on Magnetics, vol 30 (5), p. 3749-3752, September 1994, USA.

J.P.A. Bastos, N. Ida, R.C. Mesquita, J. Gomes, “Use of Reduced 3D hexahedral edge elements for 2D TE waveguides and vector potential problems”, IEEE Transaction on Magnetics, vol 30 (5), p. 3614-3617, September 1994, USA.

 

1993

 M.Vanti, A.Raizer, J.P.A. Bastos -“A Magnetostatic 2D Comparison of Local Error Estimator in FEM”, IEEE Transactions on Magnetics, vol.29 , No.2, p.1902-1905, 1993, USA.

 

1992

 Sakellaris, G. Meunier, A. Raizer, A. Darcherif, “The Impedance Boundary Condition Applied to the Finite Element Method Using Magnetic Vetor as State Variable”, IEEE Transactions on Magnetics, vol. 28, No.2, p. 1643-1646, 1992, USA.

A . Darcherif, A. Raizer, J. Sakellaris, G. Meunier, “On the Use of the Surface Impedance Concept in the Shielded and Multicinductor Cables Characteristics by FEM”, IEEE Transactions On Magnetics, vol. 28, No.2, p.1446-1449, 1992, USA.

R.C. Mesquita, J.P.A. Bastos, “An incomplete gauge formulation for 3D nodal finite element magnetostatic” – Transactions on Magnetics IEEE, vol 28 (2), p. 1044-1047, Mar., 1992, USA.

P.I. Koltermann, J.P.A. Bastos, S.R. Arruda, “A model for dynamic analysis of AC contactor” -Transactions on Magnetics IEEE, vol 28 (2), p. 1348-1351, Mar.,  1992, USA.

Sadowski, Y. Lefèvre , M. Lajoie-Mazenc, J.P.A. Bastos, “Calculation of transient electromagnetic forces in an axisymmetrical electromagnet with conductive solid parts”, COMPEL- The international journal for computation and mathematics in Electrical and electronic engineering, vol 11 (1), 173-176, Mar., 1992, England.

Sadowski , Y. Lefèvre, M. Lajoie-Mazenc , J.P.A. Bastos, “Sur le calcul des forces magnétiques”, Journal de Physique III, vol 2, p. 859-870, May 1992 , France.

Carlson, M. Lajoie-Mazenc & J.C. dos S. Fagundes, “Analysis of Torque Ripple Due to Phase Commutation in Brushless dc Machines”, IEEE Transactions on Industry Applications, vol. 28, N 3, p. 632-638, May/June 1992, USA.

 

1991

 Darcherif,A. Raizer, J.F.Imhoff,G.Meunier,J.C. Sabonnadiere, “New Techniques in FEM field calculation applied to power cable characteristics”, IEEE-Trans. on Magnetics, vol.26, No.5, p.2388-2390,1991, USA.

J.P.A. Bastos, R.C. Mesquita, “3D Finite Element Solution of Induction Heating Problems with Efficient Time-Stepping” – Transactions on Magnetics IEEE, vol 27 (5), p. 4065-4068, September 1991, USA.

 

1990

 Raizer, S.R.H. Hoole, G. Meunier and J.L.Coulomb, “P- and H- type adaptive mesh generation”, Journal of Applied Physics – vol. 27, No.9, p. 5806-5808, 1990, USA.

Raizer, J.M. Dedulle and G. Meunier, “Magnetic field computation in a tranformer core with an automatic adaptive mesh generator”, Journal of Applied Physics – vol. 27, No.9, p. 5803-5805, 1990, USA.

J.P.A. Bastos, N. Sadowski, R. Carlson, “A modeling aproach of a coupled problem between electrical current and its thermal effects” – Transactions on Magnetics IEEE, vol 26 (2), p 536-539, Mar. 1990, USA.

R.C. Mesquita, J.P.A. Bastos, “Solution of the Problem 5 using Personal Computer” – COMPEL – The International Journal for Computation and Mathematics in Electrical Engineering, vol 9, p. 203-205,  supl A, 1990, England.

 

1989

 Carlson, E. Lajoie-Mazenc, J.P.A. Bastos, M.Lajoie-Mazenc, “Computer aided design of brushless DC Machines”, IMAC’S Transaction on Scientific Computing 88, vol. 6, p. 105-107, J.C. Balzer AG Scientific Publishing Company, 1989 Basel, Switzterland.

 Raizer, G. Meunier and J.L.Coulomb, “An approach for automatic adaptive mesh refinement en finite element computation of magnetic fields”, IEEE-Trans. on Magnetics -vol.25 -No.4, p. 2965-2967, 1989, USA.

 

1988

Carlson, E. Lajoie-Mazenc, J.P.A. Bastos & M. Lajoie-Mazenc, “Computer aided design of brushless DC machines”, IMACS Trans. on Scientific Computing’88, vol. 6 – Electrical and Power systems Modeling and Simulation, 1988, p. 105-107, J.C. Balzer AG Scientific Publishing Company, Basel, Suiça.

 

1985

J.P.A. Bastos, R. Goyet, J. Lucidarme, G. Quichaud, F. Rioux, “Modélisation numérique de machine à réluctance variable à disques imbriqués” – Révue Générale d’Electricité, p. 275-281, April 1985, France.

J.P.A. Bastos, G. Quichaud, “3D Modelling of a non-linear anisotropic lamination” -Transactions on Magnetics IEEE, vol 21 (6), p. 2366-2369, November 1985, USA.

 

1984

J.P.A. Bastos, G. Quichaud, “Modélisation tridimensionnelle de feuilletages ferromagnétiques par éléments finis” – Révue de Physique Appliquée, vol 19, p.139-147, February 1984, France.

 

1982

 J.P.A. Bastos, “L’utilisation de plots de forme trapezoidale dans les machines à réluctance variable”- Révue de Physique Apliquée, vol 17, p. 693-700, September 1982, France.

 

1980

 J.P.A. Bastos, R. Goyet, J. Lucidarme, “Performances intrinsèques de machines à réluctance variable à disques imbriqués” – Révue de Physique Appliquée, vol 14, p. 45-54,  January 1980, France.

J.P.A. Bastos, G. Quichaud, F. Rioux, C. Jablon,  “Modélisation magnétique et numérique par éléments finis de feuilletages ferromagnétiques” – Révue de Physique Appliquée, vol 15, p. 1625-1630, September 1980, France.

 

1977

 Lajoie-Mazenc, R. Carlson, J. Hector & N. Pesque, “Characterization of a new machine with ferrite magnets by resolving the partial differential equation for the magnetic field”, Proceedings do IEE, vol 124, nº 8, agosto de 1977.